Key Features
- Ensure perfect mic placement with flexible gooseneck
- Remove low end build up with switchable 80Hz HPF
- Cardioid polar pattern provides tight, focused sound
- Ideal for video sessions and live performance thanks to low profile mic design
Audio Technica ATM350UL Instrument Mic with Universal Mounting System Overview
Ideal for a wide array of instruments. The Audio Technica ATM350UL Instrument Mic kit is the ultimate choice for any engineer and performer. You'll be provided with a versatile set of tools that will empower you. The kit includes a premium quality ATM350a cardioid microphone, AT8543 in-line power module, UniMount clip-on mount and 9" gooseneck as well as a hook and loop violin mount.
The ATM350UL is just as comfortable on-the-road as it is in the studio. Thanks to its cardioid polar pattern you can ensure a tight, focused sound with excellent off axis rejection. Get the sound right at the source. The ATM350UL includes a switchable high-pass filter, allowing you to reduce low-end rumble and other unnecessary frequencies. This will save you time later at the mixing stage. If you're serious about high-quality capture then look no further than the ATM350UL by Audio-Technica.
Product Ref: 105545
Full Description
View Full DescriptionFeatures
- Low-profile microphone design provides unobtrusive mounting with minimal visibility
- Crisp, clear, and well-balanced microphone response, even at high SPLs
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, providing excellent isolation of your desired sound source
- UniMount universal clip-on mount attaches securely to the instrument bell, and provides excellent shock resistance
- Rugged UniMount 9'' gooseneck rigidly holds its shape, maintaining accurate microphone positioning, even during aggressive play
- In-line power module is equipped with a switchable 80Hz high-pass filter for controlling undesirable low-frequency ambient noise
- Optional interchangeable elements available for hypercardioid and omnidirectional polar patterns (not included in this kit, must be purchased separately)
- Included violin mount with hook-and-loop fastener for additional mounting options
Specifications
- Microphone Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 40Hz to 20kHz
- Low Frequency Roll-Off: 80Hz, 12dB/Oct
- Open Circuit Sensitivity: -49dB (3.5mV) re 1V at 1Pa
- Impedance: 200 Ohms
- Maximum Input Sound Level: 159dB SPL, 1kHz at 1 percent THD
- Dynamic Range (Typical): 130dB, 1kHz at max. SPL
- Signal-To-Noise Ratio: 65dB, 1kHz at 1Pa
- Phantom Power Requirements: 11 - 52V DC, 3.5mA typical
- Switch: Flat, Roll-Off
- Microphone Weight: 14.5g / 0.5oz.
- Microphone Dimensions:
- 37.8mm / 1.49'' long
- 12.2mm / 0.48'' max. body diameter
- Power Module Weight: 90g / 3.2oz.
- Power Module Dimensions:
- 92mm / 3.62'' long
- 18.9mm / 0.74'' diameter
- Power Module Output Connector: Integral 3-pin XLRM-type
- Cable: 4.0m / 13.1ft long (permanently attached to microphone, 3.2mm / 0.13'' diameter, 2-conductor shielded cable with HIROSE HR10-type connector
- Optional Interchangeable Elements:
- UE-H Hypercardioid (Not Included)
- UE-O Omnidirectional (Not Included)
- Included Accessories:
- ATM350a Cardioid Condenser Microphone
- AT8543 Power Module
- AT8491U UniMount Universal Clip-On Mount
- AT8490L UniMount 9'' Gooseneck
- AT8468 Violin Mount (Hook-and-Loop Fastener)
- Protective Carry-Case
- Product Code: ATM350UL
| Reviews of our service
View all
