Key Features
- Radial Eclipse MS10 transformers offer incredible sound and isolation
- 8 input channels with ground lift and -20dB attenuation pad switches
- Transformer-isolation eliminates hum and buzz from ground loops
- Ultra-short signal paths with built-in RF filters prevents interference
- Perfect for live-performance, broadcast, and studio applications
DISC Radial OX8-R 8-Channel Passive Microphone Splitter Overview
Unparalleled noise-free performance for live, studio, and broadcast applications. The Radial OX8-R is the ultimate splitter with 8 balanced input channels and versatile output options.
Fitting into a single 19'' rack space, the OX8-R provides an efficient solution for taking up to 8 microphones and splitting the signal to recorders, broadcasters, PA systems and more. Three sets of outputs consisting of a direct feed with phantom power return paths, a direct feed with front-panel ground lift switches, and an isolated feed for recording ensure adaptable connectivity for a wide range of applications.
Equipped with Radial's proprietary Eclipse MS10 transformers, the OX8-R delivers truly astounding audio performance and noiseless operation. The OX8-R is an essential addition to any recording system, permanent venue installation, or broadcast rig.
Product Ref: 120485
Full Description
View Full DescriptionJensen JT-MB-CPC transformers included
The OX8-J is fitted with ultra-high performance Jensen JT-MB-CPC transformers, providing additional isolated balanced outputs as a microphone splitter. These incredible transformers feature high common-mode rejection ratios, as well a boasting a tremendous frequency response and time domain performance. These transformers are designed to be driven from a 150 Ohm microphone source, and can be used with balanced or unbalanced source and/or loads as both primary and secondary are fully-balanced. Each transformer features a 30dB magnetic shield package as standard.
Features
- Eight-channel passive microphone splitter designed to send the outputs of multiple microphones to three destinations at once
- Transformer isolation and ground lifts eliminate the hum and buzz from ground loops
- Equally at home on a live stage as it is in a broadcast studio
- Each channel is configured with a balanced input, a direct out, a thru-put with ground lift, and a fully transformer-isolated output
- High-performance Radial Eclipse ET-MS10 transformers
- Ultra-short signal paths for each channel
- Built-in RF filters to ensure absolute quiet performance even in the most noise-prone environments
- ID labels suitable for wax pencils to make setups and troubleshooting simple
- -36dB pad to reduce sensitivity for connecting line-level signals without distortion
- Auxillary direct output with front panel ground lift switch enables hard-wire passive splitting for monitors or broadcast feeds
- 25-pin D-Sub connectors for 8-channel cable harnesses, or Phoenix Euroblock connectors for permanent installations
- Inputs hardwired to the direct output to provide a return path for 48V phantom power to supply condenser mics and active DI boxes
- Legendary Radial construction ensures incredible durability and reliable operation
Specifications
- Audio Circuit Type: Passive transformer-based mic-level splitter
- Transformer: Radial Eclipse MS10
- Number of Channels: 8
- Frequency Response: 20Hz - 18kHz (+0dB/-3dB)
- Dynamic Range: 140dB
- Total Harmonic Distortion: 0.005 percent at 1kHz
- Phase Deviation: 1° at 100Hz, 5° at 20Hz
- Input Impedance: 150 Ohms, balanced
- Output Imepdance: 150 Ohms, balanced
- Common Mode Rejection Ratio: -114dB at 60Hz
- Maximum Input: +2dBu at 20Hz
- Input Connectors:
- XLR
- Euroblock
- DB-25
- Output Connectors:
- Euroblock
- DB-25
- Construction: 14-gauge steel
- Power: Passive, no power required
- Conditions: For use in dry locations only between 5°C and 40°C
- Dimensions: 482.5mm x 152.5mm x 44.5mm / 19'' x 6'' x 1.75''
- Weight: 3.4kg / 7.5lbs
- Product Code: R800-8003-00
| Reviews of our service
View all
