PreSonus Eris MTM E44 Studio Monitor

Full Description

Custom Designed Drivers

Housing two custom designed 4.5 inch, woven Kevlar low frequency drivers the E44 produces consistent frequency dispersal across the whole frequency spectrum. These innovative speakers produce an articulate and crystal clear sound allowing you to hear every nuance of your audio project. The innovative woven Kevlar design also provides fewer delayed reflections which when combined with the midrange, tweeter, midrange configuration creates unbeatably clean audio response and a transparent, cohesive sound. The E44 also incorporates a single 1.5 inch silk dome tweeter to offer shimmering high response and balanced tones perfect for both mixing and master applications.

Innovative Driver Positioning

Due to the innovative driver positioning the PreSonus Eris MTM E44 Monitors deliver an unbeatable stereo image with an improved width and clarity perfect for critical mixing applications. With dual woofers providing a more balanced stereo image the Eris E44 also houses a single high frequency driver in-between the two woofers to offer even reflections and incredibly detailed stereo imaging. This results in a more consistent listening experience, smoother frequency response and ultra-wide, detailed stereo response.

Horizontal or Vertical

Optimized for uncompromised listening applications the Eris MTM E44 studio monitor can be used vertically or horizontally to achieve incredibly accurate audio reproduction. Unlike most other monitors the E44 studio monitor features closer midrange drivers and a raised high frequency driver to ensure exceptional results no matter the orientation, allowing the MTM E44 monitor to integrate directly into any studio set up.

Advanced Controls

PreSonus understand that you will not always be able to mix in a acoustically perfect environment so they have included an innovative acoustic space control which caters to your environment with a selection of three operation modes (0dB, -2 dB, -4dB). Furthermore, located to the rear of the Eris E44 monitor is a low cut off control as well as mid and high controls to achieve a naturally balanced sound no matter the environment.

Features

• Dual 4.5 Inch Custom Woven Kevlar Low Frequency Drivers Produce Dynamic, Size-Deifying Bass Output
• 1.25 Inch Silk Dome High Frequency Driver Ensures Smooth High Frequency Performance
• Balanced XLR, Balanced 1/4 Inch TRS and Unbalanced RCA Inputs Provide Flexibility
• Acoustic Tuning Controls Help to Compensate for Room Anomalies
• Continuously Variable HF and MF Controls (-6 to +6 dB)
• Three Mode Low Cut Filter (Flat, 80 Hz, 100 Hz)
• Three Mode Acoustic Space Settings (Flat, -2 dB, -4 dB) Compensates for Room Placement
• 90 Watt/140 Watt Class A/B Bi-Amplification for an Open, Clear Sound
• RF Interference, Output-Current Limiting, Over-Temperature and Subsonic Filter Protection
• Amplifier "Soft Start" Feature Eliminates Popping on Power-Up
• Internal Power Supply with IEC Connector
• Includes Studio One Prime DAW software and Studio Magic plug-in suite

Specifications

• Inputs: 1 x XLR (Balanced), 1 x 1/4" TRS (Balanced), 1 x RCA (Unbalanced)
• LF Power Output: 50 Watts
• HF Power Output: 35 Watts
• LF Driver: Dual 4.5" Kevlar
• HF Driver: 1.25" Silk Dome
• Frequency Response: 55 Hz - 22 kHz
• Crossover Frequency: 2.9 kHz
• Input Impedance: 10 k Ohms
• SPL (Peak): 103 dB
• Volume Range: A-Type Taper
• MF Control: +/- 6 dB
• HF Control: +/- 6 dB
• Low Cut: Flat, 80 Hz, 100 Hz
• Acoustic Space: Flat, - 2dB, -4 dB
• Protection: RF Interference, Output-Current Limiting, Over-Temp, Subsonic Filter, On/Off Transient, External Mains Fuse
• Cabinet: Vinyl-Laminated, Medium Density Fiberboard
• Height: 7" / 180 mm
• Width: 14.3" / 365 mm
• Depth: 7" / 180 mm
• Weight: 5.4 Kg