intellijel 7U x 84HP Performance case with TPS30MAX Inc UK Power

Full Description

Construction

• Solid plastic carrying handle
• Anodized aluminum lid with latches, deep enough to close the case with cables patched in
• Retractable feet that can support the case at two different angles. Or lay the case flat on a table
• Plastic feet for resting the case on the table
• Rubber feet on bottom side of lid so the case can stand vertically with the lid attached
• Spring-loaded latching accessory slots on top and bottom of the case. The slots can be used to attach two cases together and for the carrying strap

Rear Panel

• Four 1/4 inch audio jacks that can be connected to the Audio I/O 1U. Two ins and two outs
• MIDI In, Out, and Thru jacks. The In jack can be connected to the uMIDI 1U and will pass to the Thru. The Out is for future expansion
• USB port that connects to the uMIDI 1U and other future modules
• Rocker switch and barrel plug for power entry

Includes:

• Lid
• Meanwell AC/DC adapter
• IEC UK power adaptor
• 3FT North American IEC power cable

Features

• Two 84 hp rows (6U) of Eurorack module space
• Threaded M3 strips for mounting modules
• Power supply capable of powering up to 20 modules with +12 V output at 1500 mA, -12 V output at 1500 mA and +5 V output at 1000 mA

Specifications

• Max internal depth for modules: 70mm
• Internal depth for modules above the highest point of the power bus board: 53mm
• Dimensions (with lid): 312mm x 165mm x 445mm
• Dimensions (without lid): 312mm x 83mm x 445mm
• Weight: 2.4kg with lid, 2.7 with lid and power adaptor
• Power: +12V output at 1500 mA, -12V output at 1500 mA, +5V output at 1000 mA